We hope to provide you with some information on the Smart - UPS 250
DataSure Services is an American Power Conversion Authorized Service Centre.
Full sine wave output
All the protection of Smart-UPS v/s plus..
SmartSlots for SNMP manageability means wide-area reliability and uptime.
Rackmountable and Extended Runtime configurations available.
UPS Interface Expander card for multiple OS unattended, graceful shutdown. Provides two additional ports to facilitate safe system shutdown of up to three different operating system servers from one UPS
Remote UPS Management Device: Remotely manage your UPS via modem. Get complete UPS information, automatic pager calls on power power problems,and remote safe reboot of servers via user supplied modem.
PowerNet SNMP Adapter - 10 Base-T card makes your UPS "SNMP" manageable from your NMS. Server connections are also maintained for local management.
Capacity 250VA , 175W
The Smart-UPS series feature offers software configurable features that allow users to "customize" the operation of a Smart-UPS to their environment and needs. Through software such as Power Doctor or PowerChute plus as well as the SNMP Adapter users may change the factory default settings and store these changes in Smart-UPS's permanent memory (EEPROM). The following parameters are adjustable:
User may assign any 8 character string to assist in UPS identification. For example, UPS ID may be server name or UPS location
Low transfer voltage may be moved downward to extend brownout range, or upward to protect sensitive equipment.
High transfer voltage may be moved lower to protect sensitive equipment, or higher to to conserve battery during extended high line conditions.
Sensitivity to line noise may be adjusted for fuel powered AC generator applications.
Smart - UPS now automatically performs self test every two weeks. This ensures a weakening battery will be detected prior to total failure. Users can opt for weekly testing, testing at start-up only, or no automatic self test.
The audible alarm may be supressed or delayed to eliminate nuisance alarms.
The low battery warning may be moved from 2 minutes up tp 10 minutes before battery exhaustion. This allows plenty of time to safely shut down Unix and other complex applications.
When utility line returns after a shutdown, Smart - Ups can insure the batteries first recharge to allow for susequent safe shutdown of file servers and CPUs. For telecom or hub applications, Smart - UPS can be set to reboot immediately.
The delay between when the "shutdown signal" is sent from the CPU to UPS and when the UPS "shuts down" can be adjusted for special occasions.
Allows multiple Smart-UPSs on the same power grid or circuit to stagger/sequence their return from Shutdown once the utility line returns.
For 230 Volt Models only.On-battery output voltage may be adjusted between 225 and 240 volts to match local voltage.
2.25 X 11.9 X 15.5 inches
5.7 X 30.2 X 39.4 cm
15 lbs. Net, 19 lbs. Shipping
6.8 kg Net, 8.6 kg Shipping
System Load(VA) Minutes Runtime
Portable 386 75 50
IBM PS/2 30 w/ mono. monitor 100 30
IBM PS/2 30 w/ VGA monitor 150 15
IBM PS/2 55sx w/ VGA monitor 200 8
Compaq 386/25e w/ VGA monitor 250 6
Two year Warranty, with up to $50,000.00 Lifetime Protected Equipment Protection.
For further information contact DataSure Services at1-800-598-6831 (604)598-6831, or email
American Power Conversion 1-800-800-4APC or FaxBack 1-800-347-FAXX or email.
Thanks for visiting DataSure's APC Pages. As the pages are developed further we hope to provide more, so please bear with us during the ongoing development process.
For more information on DataSure Services's products and services, please send e-mail to email@example.com phone us at ( 604) 598-6831, 1-800-598-6831, or FAX your request to (604) 598-6841. If you have problems or comments concerning our WWW service, please send e-mail to the above address.
Victoria, B.C. local time is
This page last modified
This page, and all contents, are Copyright (C) 1996 by DataSure Services , Victoria, Canada.